Modèle: DDFB
Test Item | Test Index |
Test Method |
Result (√ or X) | ||||
Physical properties | Water Vapor transmission rate | ≤2.5(g/m2·24h) | |||||
Oxygen transmission rate | ≤20(cm3/m2·24h·0.1Mpa) | ||||||
Tensile Strength (Mpa) MD/TD | ≥40 | ||||||
Hot Seal Strength(N/15mm) | ≥15 | ||||||
shock resistance | Longitudinal and transverse shall not more than two pieces of broken | ||||||
Heating scale(%) | ≤ ±6 | ||||||
Retained Solvents (mg/ m2) | ≤5 | ||||||
Vinyl chloride monomer content(ppm) | ≤1.0 | ||||||
Soluble substance | pH change | ≤1.0 | |||||
nonvolatile matter(mg) | n-hexane | ≤75.0 | |||||
65% ethanol | ≤50.0 | ||||||
leach liquor | ≤12.0 | ||||||
readily oxidizable substance(ml) | leach liquor compared with blank titration fluid consumption≤1.5 | ||||||
clarity | liquor should be clear |
||||||
Heavy Metal(%) | ≤0.0001 | ||||||
Joint requirements | Number of joints(pcs) | the number of cutting joint less than 1pc | |||||
Joint mark | Red tape, design patterns, leakage of 2 mm, ending with the white tape | ||||||
Core | The Size of Core (mm) | 3 inches, the thickness more than 8 mm, | |||||
The Length of core(mm) | The width deviation of core is less than ±2mm | ||||||
Size deviation | The total thickness of the deviation | the limit is less than ±20um,the average is less than10um | |||||
The deviation of Slitting width | ≤±1mm | ||||||
The deviation of end face flatness | ≤±2mm | ||||||
Packaging | Inner Packing | Paper label + plastic bag + plastic plug | |||||
outer packing | corrugated carton + barcode label | ||||||
remark | |||||||
Function: blister packing |
Groupes de Produits : Film laminé > Autre film laminé